WF2409E v4 (V4.0.1.4296)

Applicable scope: Basic version (only supports firmware upgrades after V4.0)

Description:
1. Add parameter appFlags to hide the app page
2. Optimize automatic upgrade
3. Add management configuration to the page (login without management password)
4. Fix the problem that rid token is not saved when client is active

This frmware is ony for Bangladesh, please follow the operational instructions below for the upgrade.

Note:

1. If the firmware version of your router WF2409E is V1.0 or V3.0 and you need to upgrade it to V4.0, please follow this guide.
2. The folder contains two upgrade files: WF2409E-T-version-BD.bin and Netis(WF2409E)-V4.0.1.4296.2024.10.1114_59._fw.bin.
3. The WF2409E-T-version-BD.bin is only a transitional upgrade version and should not be used as a long-term release. You must upgrade it to the official version afterward.
4. Netis(WF2409E)-V4.0.1.4296.2024.10.1114_59._fw.bin is the first V4.0 firmware for WF2409E. After upgrading to this firmware, you need to restore the router to factory settings and reconfigure all parameters.

Detailed Operation Steps：

1. Prepare the transition version firmware

Prepare the transition firmware file: WF2409E-T-version-BD.bin.

2. Upgrade to the transition version

 
(Netis Wireless Router - 192.168.1.254/index.htm)
Fig. 1: Firmware Upgrade Interface

Tips: Do not power off the router during the upgrade.

3. Access the management page after transition upgrade

After completing the transition upgrade, enter 192.168.1.254 to open the login page (Fig. 2).

 
Fig. 2: Router Login Interface

Enter the router management password to log in.

4. Upgrade to the official version

Take official version 4.0.1.4296 as an example:

Fig. 3: Official Version Upgrade Interface

 

Tips: The firmware upgrade will take several minutes. Do not power off the router.

5. Complete the upgrade and access the router

Wait for the upgrade to succeed. Manage the router via:

• IP address: 192.168.1.1
• Manage the router via ：http://netis.cc 

Note: A factory reset will occur after upgrading to V4.0. Reconfigure the router settings as needed.
Fig. 4: Post-Upgrade Welcome Interface

Important Notes：

• The intermediate version is only a transition upgrade version and shall not be used as a long-term version. It must be upgraded to the official version..
• After a successful upgrade, parameters will sync with the 4.0 version rules.

Management Details:

• Default IP: 192.168.1.1
• Manage the router via ：http://netis.cc
• Default SSID: netis-XXXXXX

 

WF2409E, V6 (V3.0.0.3500)

Description:
1. Optimize MAC filtering function.
2. Adding filter MAC cannot access router management page.
3. Adding device blacklist function.

*Cautions (Read it carefully before firmware upgrade)
1. This firmware is only for WF2409E, V6 routers (Please check router back sticker)
2. Update firmware using the computer Lan port connected to the Router Lan port.
3. Do not update from wireless/Mobile.
4. Do not turn off the power during update.
5. After upgrade reset the router by pressing default/reset button for 10 seconds.

This firmware is only for Bangladesh.

WF2409E v4 (V4.0.1.4296)

Applicable scope: Basic version (only supports firmware upgrades after V4.0)

Description:
1. Add parameter appFlags to hide the app page
2. Optimize automatic upgrade
3. Add management configuration to the page (login without management password)
4. Fix the problem that rid token is not saved when client is active

Description:

Improve the wifi stability and IPTV performance ,and add the schedule reboot function.

Description:

1. replace wireless driver
2. Optimize iptv performance
3. Optimize get IP LAN host performance
4. Fixed some other problems.

Description:

1. Added port mirror function;
2. Added hostname for DHCP access mode;
3. Fixed some other problems; Please verify your firmware version of your device Before upgrading. V2.3.36411 (Global version) cannot upgrade to V2.6.36411 (Russian version) and vice versa. Wrong firmware upgrade may damage your device and void the warranty.